Summertime: Part 8 – stitching flora

Posted on June 1, 2025 by Salley Mavor

In Part 8 of the series about Summertime, I share photos and videos documenting the process of stitching flora. So far, I’ve written an overview of the piece, Part 1 – Tree Trunks, Part 2 – Tree Houses, Part 3 – leaves, stems & branches, Part 4 – Baltimore Oriole (body), Part 5 – Baltimore oriole (head and feet), Part 6 – rose vine, and Part 7 – raspberry plants.

Summertime is the summer scene in a series of four seasonal landscapes that capture the wonder and magic of the natural world. Posters, note cards, prints, bookmarks, and jigsaw puzzles of Summertime and the other scenes in the series (Frosty Morning, Mossy Glen and Harvest Time) are available in my Etsy Shop.

See the Four Seasons Series and dozens of other works in my exhibition, To Every Season: Works by Salley Mavor at the New England Quilt Museum, Sept. 9 – Dec. 31, 2025.The show includes recent work, as well as rarely seen early pieces on loan from private collections.

Towards the end of the project, after months of constructing most of the 3-dimensional parts of the scene, I was ready to zero in and add embroidered leaves and flowers where they were needed. In the following video, you can see how I spread out on different work tables in my studio. Every horizontal surface was full of materials and tools, as well as the bits and pieces I’d finished making.

To do the stitching, I require very few things – a piece of felt, a needle, thread, and a thimble. And good lighting, of course. And closeup glasses. No hoop, no cumbersome magnifying equipment and no fancy needles or scissors.

It was almost impossible to draw markings on this fuzzy wool felt, even with chalk. So, I mostly worked freehand and removed the stitched red guide lines later in the process. I used DMC cotton flower thread, which is thicker and bolder than embroidery floss. In this video, watch how I chain-stitched leaves and added Parawire stems on top.

Chain-stitching these leaf shapes was as soothing as filling in a coloring book.

I added patches of black-eyed susans to open areas of blue sky below the raspberries and above the stone wall (coming in part 9).

In other open areas, I chain-stitched blades of grass, dotted with little French knot flowers.

I was nearing the end of the project, which meant that it was time to tackle the border. I got out my stash of upholstery fabric and tried out different color combinations. Red and gold popped out at me; they contrasted with the blue sky and brought out the color of the raspberries. I padded the wooden stretchers with cotton quilt batting and sewed the upholstery fabric around the frame, which created a shallow box to fill with all of the parts.

Stay tuned for Part 9, where I’ll share photos and videos documenting the process of stitching moss and the sky, and building the stone wall in Summertime.

To keep up with new posts, please subscribe to this blog. Your contact info will not be sold or shared. If you’d like to see more frequent photos tracking the projects in my studio, please follow me on Facebook, Instagram and BlueSky.

Summertime: Part 7 – raspberry plants

Posted on May 5, 2025 by Salley Mavor

In Part 7 of the series about Summertime, I share photos and videos documenting the process of making the raspberry plants. So far, I’ve written an overview of the piece, Part 1 – Tree Trunks, Part 2 – Tree Houses, Part 3 – leaves, stems & branches, Part 4 – Baltimore Oriole (body), Part 5 – Baltimore oriole (head and feet), Part 6 – rose vine, Part 8 – stitching flora, and Part 9 – moss, sky and stone wall.

RASPBERRIES
The idea to add raspberries came late in the process, months after I’d begun stitching and constructing the piece. I was inspired by our new raspberry patch, which was producing the most succulent fruit I’d ever grown. The raspberries practically begged to be featured in the summer scene! My original design included flowers, but I was much more excited about making raspberries.

Now came the fun part, where I examined raspberries, both real and in photos, imagining how to replicate them with stitching and found objects. I searched through my stash and found some frosted glass beads that were just the right shade of reddish pink. The goal wasn’t to reproduce exact copies, but to make the imitation raspberries look even more scrumptious than real ones. The following video demonstrates how I made the felt core, sewed on the beads, and wrapped the stem with embroidery floss.

My supply of beads was limited, so I conserved them by covering just the top and sides of the felt core, leaving a bare back that could more easily be sewn to the background fabric. When I ran out of red beads, I used yellow ones to make more raspberries.

RASPBERRY LEAVES
Looking closely, I noticed that raspberry leaves were quite complex, with fine saw-like teeth that would be hard to replicate in felt. I ended up making a stylized version that was as pointy as I could get.

The following video shows how I sewed wire around the outside edge and embroidered veins on a felt raspberry leaf.

Once there were enough berries and leaves, I linked them together with wire branches. Then, I covered the wire with embroidery floss.

This video shows how I twisted Parawire to make stems and branches and then wrapped the wire with embroidery floss.

This video shows how I covered the thicker bottom branches with a strip of brown felt.

This project is a clear example of the importance of flexibility in my working process. There’s a reason that I steer away from textiles and needlework that involve grids, graphs or patterns. In the beginning, I’m not so certain about how my art is going to develop. Sure, I start with a basic design and structure, but I like to keep a door open for change. In this case, raspberries showed up.

Stay tuned for Part 8, where I’ll share photos and videos documenting the process of stitching flora in Summertime.

Summertime: Part 6 – rose vine

Posted on March 16, 2025 by Salley Mavor

In Part 6 of the series about Summertime, I share photos and videos that document the process of making the rose vine. So far, I’ve written an overview of the piece, Part 1 – Tree Trunks, Part 2 – Tree Houses, Part 3 – leaves, stems & branches, Part 4 – Baltimore Oriole (body), and Part 5 – Baltimore oriole (head and feet). Part 7 – raspberry plants, and Part 8 – stitching flora.

See the Four Seasons Series and dozens of other works in my exhibition, To Every Season: Works by Salley Mavor at the New England Quilt Museum, Sept. 9 – Dec. 31, 2025. The show includes recent work, as well as rarely seen early pieces on loan from private collections.

ROSES
I learned how to make basic felt roses like these years ago from Mimi Kirchner’s blog. Mimi’s tutorial is available here. I love how deceptively simple the process is, starting with a circle of felt and folding it like origami to make a rose shape. Watch the following video to see how I finished off the raw felt edges with blanket stitching and folded the circle to make a rose.

Felt Rose

LEAVES
To cut out the sharp-toothed edge around the rose leaves, I used pinking shears. The following video shows how I stitched wire around the outside of a felt leaf and embroidered its stem and veins.

Felt Rose Leaf

I twisted wire to make a central vine and added the roses, leaves, thorns, and curly tendrils. Besides felt and embroidery floss, the most common material in my artwork is wire. Felt alone is too floppy and needs structural supports. I used Parawire in a range of gauges, from 24 to 32, to build up the thickness and strength I wanted.

The last step was disguising the shiny metallic wire with embroidery floss. Part 3 in this series includes videos of wrapping wire stems and branches on other foliage in the Summertime piece. I wound 1 or 2 strands of floss around and around the stems until the surface was evenly covered. It was a bit tricky to make the thorns look sharp!

Stay tuned for Part 7, where I’ll share photos and videos documenting the process of making the raspberry plants in Summertime. To keep up with new posts, please subscribe to this blog. Your contact info will not be sold or shared. If you’d like to see more frequent photos tracking the projects in my studio, please follow me on Facebook, Instagram and BlueSky.

Summertime: Part 5 – Baltimore Oriole (head and feet)

Posted on February 16, 2025 by Salley Mavor

In this Part 5 of the series about Summertime, I share photos, videos and commentary that document the process of making the Baltimore Oriole’s head and feet. So far, I’ve written an overview of the piece, Part 1 – Tree Trunks, Part 2 – Tree Houses, Part 3 – leaves, stems & branches, and Part 4 – Baltimore Oriole (body), Part 6 – rose vine , Part 7 – raspberry plants, and Part 8 – stitching flora.

See the Four Seasons Series and dozens of other works in my exhibition, To Every Season: Works by Salley Mavor at the New England Quilt Museum, Sept. 9 – Dec. 31, 2025. The show includes recent work, as well as rarely seen early pieces on loan from private collections.

I wouldn’t call myself an avid bird watcher, but I do appreciate the subtle differences that make each species unique. For this piece, the trick was to capture the bird’s distinguishing features without being too scientific. To understand the nuances of an Oriole, I studied photos and made sketches, paying particular attention to the position, size and angle of its head, eyes and beak.

BEAK
I must have been so focused on making the bird’s hood and eye (it’s a glass bead) that I forgot to take photos of that part. So, let’s skip ahead to the beak. To make it pointy, I formed a wire extension and wrapped it with embroidery floss.

I articulated the shape of the beak with floss, stitching over and around, until it had a smooth and seamless appearance.

Watch this video to see how I stitched the beak. It even shows what the back looks like!

After the beak was finished, I embroidered black feathers with fly stitches on the neck and throat area.

I sewed the wing and tail (see Part 4) in place and got to work on making the Oriole’s feet.

FEET
I shaped the bird’s feet and legs with wire, twisting it around to form 4 toes – 1 short and 3 long. Then, I wrapped the wire with embroidery floss, winding the thread up and down until no shiny wire was exposed and the feet were the right thickness.

Watch this video to see how I constructed the legs and feet and attached them to the bird’s body.

Stay tuned for Part 6, where I’ll share photos and videos documenting the process of making the rose vine. If you want to receive email notices when I publish new posts, please subscribe to this blog using the form below.

Summertime: Part 4 – Baltimore Oriole (body)

Posted on February 2, 2025 by Salley Mavor

In this Part 4 of the series about Summertime, I share photos, videos and commentary that document the process of making the Baltimore Oriole’s body, including its breast, wing and tail. The bird’s head and feet will be featured in Part 5, which is next in line. So far, I’ve written an overview of the piece, Part 1 – Tree Trunks, Part 2 – Tree Houses, and Part 3 – leaves, stems & branches, Part 5 – Baltimore Oriole (head and feet), Part 6 – rose vine , Part 7 – raspberry plants, and Part 8 – stitching flora.

See the Four Seasons Series and dozens of other works in my exhibition, To Every Season: Works by Salley Mavor at the New England Quilt Museum, Sept. 9 – Dec. 31, 2025.

Enchanting Threads: The Art of Salley Mavor at the Albany Institute of History and Art

BALTIMORE ORIOLE
I chose a male Baltimore Oriole for the summer scene mostly because of its flashy appearance. They also epitomize the season for me. Pairs of orioles are frequent visitors to our yard in early summer, when we lure them with orange halves and grape jelly. I hadn’t made a bird this size since Birds of Beebe Woods (2012), which you can get a glimpse of on the wall in the following video.

First, I looked at photos of orioles and made a simple drawing that showed its size and proper proportions. Then, I cut the basic shape out of acid-free matte board and padded it with thick felt (which is similar to how I made pins early in my career). Throughout the process of making the bird, I referred to photos, especially when selecting colors and stitches for the body, wing, and tail.

I wanted to make the bird realistic enough to be recognized as a species, but patterned and abstracted in a way that made it fun to stitch. It ended up being something between a stylized bird and a biological illustration.

BREAST
For the oriole’s distinctive orange breast, I embroidered different combinations of fly stitches that are reminiscent of Faire Isle patterns. It brought me back to a dozen years ago, when I stitched the crow’s breast in Birds of Beebe Woods.

I used cotton flower thread, which has a matte finish that’s different from the glossy sheen of cotton embroidery floss. DMC flower thread is no longer available, so if you’re interested, Dutch Treat Designs has some of the discontinued thread in stock.

Watch a Stitch Minute video of embroidering the oriole’s breast with fly stitches.

WING
I usually work freehand without marks, because it’s hard to draw on fuzzy wool felt. In this case, I was able to make chalk pencil lines on the black felt wing.

Watch a Stitch Minute video of embroidering the bird’s wing.

TAIL
So much of a bird’s personality comes through in the angle and pose of its tail. Doing the stitching was the easy part. Positioning the tail and attaching it to the body took more patience and perseverance.

Watch a Stitch Minute video of embroidering and attaching the bird’s tail.

Stay tuned for Part 5, where I’ll share photos and videos documenting the process of making the Baltimore Oriole’s head and feet. If you want to receive email notices when I publish new posts, please subscribe to this blog using the form below.

Summertime: Part 3 – leaves, stems, and branches

Posted on January 9, 2025 by Salley Mavor

As promised, I’m picking up where we left off last year and continuing the series about Summertime, the fourth of my seasonal landscapes. In the coming months, I’ll share photos, videos and commentary about different aspects of the project, from raspberries to wee folk inhabitants to a life size Baltimore Oriole. I went overboard documenting the process, so there’s a ton of material to show. So far, I’ve written an overview of the piece, Part 1 – Tree Trunks, and Part 2 – Tree Houses, Part 4 – Baltimore Oriole (body) , Part 5 – Baltimore Oriole (head and feet), Part 6 – rose vine , Part 7 – raspberry plants, and Part 8 – stitching flora..

See the Four Seasons Series and dozens of other works in my exhibition, To Every Season: Works by Salley Mavor at the New England Quilt Museum, Sept. 9 – Dec. 31, 2025.

LEAVES
Some of the foliage in this piece are realistic interpretations, like the leaves on the rose vine and raspberry plants (which will be covered in future posts), but others are pure fantasy. I wanted the scene to look believable, without being completely true to life. It’s not biological illustration; I was more interested in creating a unique ecosystem where little people could live alongside birds and berries.

I made the leaves with 3 basic materials – wool felt, wire, and embroidery floss. The following Stitch Minute video demonstrates how to make a simple leaf, edged in wire.

Stitch Minute – leaf

STEMS
Wire is literally the backbone of my work. I use it as a structural framework to keep floppy materials (like felt) firm enough to exist in space, above the background fabric. In this piece, I used copper wire made by Parawire to edge the leaves and form their stems.

The trick is to cover all of the shiny metal with floss. It takes many passes around the wire to make a smooth surface.

This video shows how I wrapped the wire stems on the central tree in the Summertime scene.

For me, making curvy stems and bending them around is like doodling with wire. I’m never sure how a vine is going to grow and climb. This purple bush was calling out for something extra, so I made a curly vine to wrap around its trunk.

In this Stitch Minute video, you can see how I wrapped the curly vine, including its little corkscrew tendril.

BRANCHES
After years of developing ways of making tree branches, my preferred method these days is forming wire armatures and covering them with felt or embroidery floss. I usually embroider a textured “bark” pattern onto the felt before sewing it around the wire. Thicker tree trunks involve a different process, which I wrote about in Part 1.

In the following video, you can see how I stitched felt to cover the section that branches off into 3 separate wire limbs.

Stay tuned for Part 4 in this series, which will be about the Baltimore Oriole. If you want to receive email notices when I publish new posts, please subscribe to this blog using the form below.

Summertime Poster!

Posted on September 6, 2024 by Salley Mavor

I’m thrilled to announce that 18″ x 24″ posters of Summertime are now available in my shop! This frameable poster is the closest thing to seeing the piece in person, which I realize is out of reach for many of you (visit this page for current exhibitions). The original bas-relief embroidered scene is just an inch larger than the printed reproduction, so the scale of the wee folk, raspberries, and thousands of stitches is very similar to their actual size. If you’ve seen my other posters, like the one of Birds of Beebe Woods, you know that the photography and printing quality is very good, too.

Will the other scenes in the series, Frosty Morning, Harvest Time, and Mossy Glen be made into posters as well? It really depends on how much interest there is. I’d like to eventually offer all four seasons, but first I’m testing the market with Summertime posters to determine if it’s worth the financial investment. I’m excited to be adding Summertime posters to the list of books, notecards, puzzles, notebooks and bookmarks now available in my shop.

Enter Salley Mavor’s Etsy Shop

Summertime is one of four seasonal landscapes that will be icluded in my solo exhibition, Works by Salley Mavor: To Every Season at the New England Quilt Museum, Sept. 9 – Dec. 27, 2025.

The Four Seasons series is included in “Enchanted Threads: The Art of Salley Mavor” at the
Albany Institute of History and Art in Albany, NY.

Summertime: Part 1 – Tree Trunks

Posted on July 3, 2024 by Salley Mavor

In this Part 1 of the series about making Summertime, I share photos and commentary about how I created the tree trunks, which provide the framework for the whole composition. In this post, I reveal what’s inside the trunks and show how I covered them with felt and embroidered embellishment. Future posts will discuss other elements of the piece, including the treehouses, plants, raspberries, wee folk, and the Baltimore Oriole. So far, I’ve written an overview of the piece, Part 1 – Tree Trunks, Part 2 – Tree Houses, Part 3 – leaves, stems & branches, Part 4 – Baltimore Oriole (body), Part 5 – Baltimore Oriole (head and feet), Part 6 – rose vine, Part 7 – raspberry plants, and Part 8 – stitching flora.

See the Four Seasons Series and dozens of other works in my exhibition, To Every Season: Works by Salley Mavor at the New England Quilt Museum, Sept. 9 – Dec. 31, 2025.

Before threading the first needle, I pictured the scene in my head for months, mostly while taking walks or riding on the bike path. During this early stage of the process, I made a lot of thumbnail sketches and worked out the basic design. Once I could clearly see a path forward, I enlarged a drawing to the full 19″ x 24″ size and used it as a simple guideline. All of the color choices, design changes, and stitching details would come later, as the piece evolved.

I formed the structure of the tree with insulated electrical wire of different thicknesses that I found at the hardware store. To make forked branches, I stripped the plastic coating at the ends and wound the exposed copper wire around the adjoining branches. The whole idea was to make an armature that was flexible and strong enough to bend and manipulate as needed.

To build up the thickness of the tree, I wrapped the wire with cut strips of cotton quilt batting, which I roughly stitched in place.

The next step was to cover the padded wire with wool felt. I started by stitching felt pieces to the back of the tree trunk and branches, making a flat surface that would eventually be sewn to the background sky.

Then I stitched pieces of felt over the curved front. The photo below gives a view from the back, as I overlapped the front strip of felt over the back piece. The messy seams will all be covered with embroidery and hidden in the back.

After covering the tree with felt, I stitched a zigzag “bark” texture up and down the branches with pima cotton.

At first, I liked how the pink and tan variegated thread looked, but soon realized that it alone was too subtle and needed more saturated accent colors to help it pop in contrast to the sky background.

I added bright turquoise and then decided to go even further with hot pink, which I also used to create a cross-hatched effect along the sides of the trunks.

I used finer gauge wire to form the smaller branches and wrapped them with embroidery floss.

I sewed some glass beads that have been stored in my stash for 20 years to the tips of the branches. It felt so good to finally put them to use!

Stay tuned for future posts in this series about Summertime. In Part 2, I will show how I made the thatch-roofed treehouses nestled into the tree trunks. If you want to receive email notices when I publish new posts, please subscribe to this blog using the form below.

Summertime overview

Posted on June 2, 2024 by Salley Mavor

With warmer weather approaching, it seems like a good time to begin a new multi-part series about making Summertime, the fourth of my seasonal landscapes. It feels so good to have completed all four seasons in this project! I started making them during the pandemic as a way to focus on something positive and healing. UPDATE: So far, I’ve written Part 1 – Tree Trunks, Part 2 – Tree Houses, Part 3 – leaves, stems & branches, Part 4 – Baltimore Oriole (body), Part 5 – Baltimore oriole (head and feet), Part 6 – rose vine, Part 7 – raspberry plants, Part 8 – stitching flora and Part 9 – moss, sky and stone wall.

Over the coming weeks and months, I will share photos, videos and commentary about different aspects of the project, from raspberries to tree houses and their inhabitants to a life size Baltimore Oriole.

Summertime is the summer scene in a series of seasonal landscapes that capture the wonder and magic of the natural world. See the Four Seasons Series and dozens of other works in my exhibition, To Every Season: Works by Salley Mavor at the New England Quilt Museum, Sept. 9 – Dec. 31, 2025.

Posters, note cards, bookmarks, and jigsaw puzzles of Summertime and the other scenes in the series (Frosty Morning, Mossy Glen, and Harvest Time) are available in my Etsy Shop.

The following video shows how I arranged different parts of the scene before sewing the pieces in place.

I know that you like to see my fingers in action, so I took videos of different parts of the process. Sometimes I weeded the garden and stitched on the same day, so I hope that my dirty fingernails aren’t too distracting! Here are 2 previews of making the bird’s beak and sewing raspberries. There’s lots more to show, so stay tuned! If you want to receive email notices when I publish new posts, please subscribe to this blog using the form below.

Summertime makes the finish line!

Posted on September 21, 2023 by Salley Mavor

I’m happy to report that after almost a year of work, Summertime, the newest scene in my seasonal landscape series, is finished! Now all four seasons will be included in my upcoming exhibition at the Southern Vermont Arts Center. The Wee Worlds of Salley Mavor will be on view Sept. 30, 2013 – Jan. 7, 2024.

Further ahead in this post, you will find information about the exhibition, a preview of future posts about making Summertime and new items in my Etsy Shop.

I don’t know why Summertime took so much longer to complete than the other seasons in the series. Mossy Glen, Frosty Morning and Harvest Time also have a gazillion stitches, but they each only took about 4 months to make. It could have something to do with the change in my daily routine since my grandson, Elias was born in January. Playing with the baby is now high on my list of essential activities, which includes sleeping, eating and stitching. Obviously, my priorities have shifted!

To reach the exhibition deadline, I spent the past few months stitching as much as possible, including in the evenings, like I used to do when my children were little. That’s why this is the first blog post I’ve written in months!

As with the other landscapes in the 4 Seasons series, I documented the process of making Summertime with photos and videos along the way, so there’s a lot of material to share in future blog posts, including a varied assortment of Stitch Minute videos.

If you’ve followed me on Instagram and Facebook during the past year, you’ve seen Stitch Minute videos that show different aspects of my process. I’m happy to offer photos and minute-long peeks over my shoulder while I work, but please don’t ask me to explain my techniques in detail. Much of what I do is instinctual and I worry that over-analyzing my process would spoil the magic for me. To learn my personal philosophy about sharing knowledge, please read my post to teach or not to teach.

Here are two Stitch Minute videos that I made in August, while working on Summertime.

New 4 Seasons Items in my Esty Shop

Now that the seasonal landscape series is finished, I’m excited to offer note cards, jigsaw puzzles and archival prints of all four seasons:
Summertime, Mossy Glen, Harvest Time and Frosty Morning.
My Etsy Shop offers FREE SHIPPING on US orders of $35.00 or more. I’m sorry to disappoint my international fans, but due to the prohibitive cost of shipping overseas, I now only take orders from the USA and Canada.

$ Seasons Note Card Sampler is available in my Etsy Shop

Summertime Jigsaw Puzzle is available in my Etsy Shop

8.5 x 11 Archival Print of Summertime is available in my Etsy Shop

The Wee Worlds of Salley Mavor exhibition

Yesterday, my artwork was picked up and driven in a van to Manchester, Vermont for my exhibition at the Southern Vermont Arts Center. It’ll be a large show, with over 75 pieces, including the 4 Seasons and the original illustrations for my most recent picture book, MY BED. On view will be a wide range of work, from early in my career to today, as well as a wall covered with over 100 wee folk dolls!

There will be a lot to enjoy at the Southern Vermont Arts Center this fall, especially for those of you with a playful bent. I’m so pleased that my work will be just around the corner from a fascinating and whimsical display of the late illustrator Ashley Bryan’s collection of toys, objects, puppets and paintings. Ashley Bryan: The Spirit of Joy and The Wee Worlds of Salley Mavor will be on view Sept. 30, 2013 – Jan. 7, 2024. I hope to see some you at the opening reception on Sept. 30th, where l will give a gallery talk at 3:00 PM.